04591 by Toro - Greensmaster eTriFlex 3370(04591) | Mathu's Appliance & Power Equipment

All-Electric Reel Drive

In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW). This translates into the power you need when you need it for unparalleled performance in your most challenging cutting applications.

Superior Clippings Capture

Redesigned clipping capture system maintains a consistent gap between the basket and reel to retain nearly all grass clippings for a cleaner and healthier cut. In addition, a discharge shield forces clippings inside of basket and minimizes "blow-by".

EdgeSeries Reels

Dual Precision Adjustment (DPA) cutting units featuring Toros EdgeSeries reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention. Watch the Video

Balloon Style Tires

Tires have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tire tracks.

No Onboard Hydraulic Fluid

With traction, lift, steering, and reel drive all being electric, there are no hydraulic systems on the eTriFlex Series of mowers. Sleep easy knowing that leaks or even the risk of hydraulic leaks are a thing of the past.

Auto-Brake on Operator Dismount

If the operator leaves the seat when the mower is running and fails to engage the parking brake, the system will sense it and automatically engage the parking brake to ensure the operators safety and avoid the machine rolling away.

Amazingly Quiet Operation

The 3370 & 3360 eTriFlex models run at an amazingly quiet noise level 66.5 & 73 dBA (respectively) which minimizes early morning disturbances and results in 50% lower perceived bystander noise level.

Proven Flex Suspension (Patented)

Superior contour following capability utilizes an integrated "Flex" linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.

Stored Energy

Eliminates clip marks at the startup of a mowing pass and provides braking power to stop reels from spinning when cutting units are disengaged for safer operation.

Lift-In-Turn Cutting Units

The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.

Familiar Operation & Controls

The operational controls for the eTriFlex series of mowers are based on the same platform as existing Greensmaster TriFlex models. This allows operators that are familiar with the TriFlex models to immediately begin running the eTriFlex models with minimal training or instruction. Just mow!

Speed Dependent Reel Drop and Even Cut Line

When the operator is raising or lowering the cutting units while in motion, the onboard computer system calculates the exact timing to raise/lower the rear cutting unit in order to match the cut line of the front two cutting units. This allows for consistent and precise cutting maneuvers from green to green.

Double A-Arm Suspension

The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.

DPA Cutting Units

The most advanced cutting unit in the industry: Only two adjustments Superior height-of-cut retention No daily greasing (stainless steel bearings) Consistent cutting edge regardless of reel wear (patented) Smallest bedknife increment adjustments .007 inch (.178mm)

Slow-in-Turn

When mowing or in transport mode, the eTriFlex Series mowers sense the steering rate of change and automatically slows the speed of the machine when aggressive turns are made. This results in reduced turf damage from skidding wheels, and provides the operator with ample control of the mower.

Radius Dependent Speed Systems (RDS)

The RDS Systems control both the speed of the reels as well as the wheels to provide a consistent even clip-rate across the cutting heads and minimize scuffing from the wheels during clean-up passes. The RDS system virtually eliminates Triplex Ring and ensures high quality after cut appearance.

Exclusive Lift-Gate Footrest

Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.

Tool-Free, Quick-Change Cutting Units

A single operator can go from cutting Greens at 0.125" (3.2 mm) to cutting a Fairway at " (19 mm) in just minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.

Superior Traction

Both front wheels are powered by electric traction motors with a gear reduction. The posi-traction system improves traction over a hydraulic or mechanical differential to ensure positive two-wheel drive while minimizing tire scrubbing. *An optional 3WD Kit is available for more severe hill climbing capabilities.

All-Electric Reel Drive In addition to eliminating hydraulic leaks, each reel motor has a nominal 1.5 horsepower (1.1 kW). This translates into the power you need when you need it for unparalleled performance in your most challenging cutting applications.

Superior Clippings Capture Redesigned clipping capture system maintains a consistent gap between the basket and reel to retain nearly all grass clippings for a cleaner and healthier cut. In addition, a discharge shield forces clippings inside of basket and minimizes "blow-by".

EdgeSeries Reels Dual Precision Adjustment (DPA) cutting units featuring Toros EdgeSeries reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention. Watch the Video

Balloon Style Tires Tires have been redesigned to deliver uniform loading across the entire cross-section (load footprint area) to eliminate side wall loading that can create visible tire tracks.

No Onboard Hydraulic Fluid With traction, lift, steering, and reel drive all being electric, there are no hydraulic systems on the eTriFlex Series of mowers. Sleep easy knowing that leaks or even the risk of hydraulic leaks are a thing of the past.

Auto-Brake on Operator Dismount If the operator leaves the seat when the mower is running and fails to engage the parking brake, the system will sense it and automatically engage the parking brake to ensure the operators safety and avoid the machine rolling away.

Amazingly Quiet Operation The 3370 & 3360 eTriFlex models run at an amazingly quiet noise level 66.5 & 73 dBA (respectively) which minimizes early morning disturbances and results in 50% lower perceived bystander noise level.

Proven Flex Suspension (Patented) Superior contour following capability utilizes an integrated "Flex" linkage system to allow cutting units to pivot around the center of the front roller to master undulations and prevent side-to-side scrubbing of the putting surface.

Stored Energy Eliminates clip marks at the startup of a mowing pass and provides braking power to stop reels from spinning when cutting units are disengaged for safer operation.

Lift-In-Turn Cutting Units The suspension system is designed to provide a slight lift to the inside of the cutting units during turns to deliver a consistently level cut and to reduce "triplex ring" for improved playability and turf health.

Familiar Operation & Controls The operational controls for the eTriFlex series of mowers are based on the same platform as existing Greensmaster TriFlex models. This allows operators that are familiar with the TriFlex models to immediately begin running the eTriFlex models with minimal training or instruction. Just mow!

Speed Dependent Reel Drop and Even Cut Line When the operator is raising or lowering the cutting units while in motion, the onboard computer system calculates the exact timing to raise/lower the rear cutting unit in order to match the cut line of the front two cutting units. This allows for consistent and precise cutting maneuvers from green to green.

Double A-Arm Suspension The suspension system maintains full floatation range to prevent gouging or scalping when going over undulations.

DPA Cutting Units The most advanced cutting unit in the industry: Only two adjustments Superior height-of-cut retention No daily greasing (stainless steel bearings) Consistent cutting edge regardless of reel wear (patented) Smallest bedknife increment adjustments .007 inch (.178mm)

Slow-in-Turn When mowing or in transport mode, the eTriFlex Series mowers sense the steering rate of change and automatically slows the speed of the machine when aggressive turns are made. This results in reduced turf damage from skidding wheels, and provides the operator with ample control of the mower.

Radius Dependent Speed Systems (RDS) The RDS Systems control both the speed of the reels as well as the wheels to provide a consistent even clip-rate across the cutting heads and minimize scuffing from the wheels during clean-up passes. The RDS system virtually eliminates Triplex Ring and ensures high quality after cut appearance.

Exclusive Lift-Gate Footrest Easy access to the center cutting unit facilitates routine maintenance and repairs, simplifies adjustments, and eliminates the need to put the traction unit on a lift for cutting unit service saving you time, money, and frustration.

Tool-Free, Quick-Change Cutting Units A single operator can go from cutting Greens at 0.125" (3.2 mm) to cutting a Fairway at " (19 mm) in just minutes. The tool-free, quick-change cutting units make it as easy as 1-2-3.

Superior Traction Both front wheels are powered by electric traction motors with a gear reduction. The posi-traction system improves traction over a hydraulic or mechanical differential to ensure positive two-wheel drive while minimizing tire scrubbing. *An optional 3WD Kit is available for more severe hill climbing capabilities.

Features

Each reel motor delivers 1.5 horsepower (1.1 kW) for reliable power
Clipping capture system retains nearly all grass clippings for a cleaner and healthier cut
Deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance
Redesigned tires deliver uniform loading across the entire cross-section to reduce visible tire tracks
Sleep easy knowing that leaks or even the risk of hydraulic leaks are a thing of the past
System will sense and automatically engage the parking brake when operator leaves the seat
Amazingly quiet noise level minimizes early morning disturbances
Integrated "Flex" linkage system allows cutting units to pivot around the center of the front roller
Provides braking power to stop reels from spinning when cutting units are disengaged
The suspension system slightly lifts the inside of the cutting units during turns, ensuring a more consistent cut
Operational controls are based on the same platform as existing Greensmaster TriFlex models
Onboard computer system calculates the exact timing to raise/lower the rear cutting unit
Suspension system maintains full floatation range to prevent gouging or scalping when going over undulations
Most advanced cutting unit in the industry
Automatically slows the speed of the machine when aggressive turns are made
Control both reel and wheel speeds to minimize scuffing during clean-up passes
Perform routine maintenance and repairs with easy access to the center cutting unit
Switch from cutting greens to cutting a fairway in just minutes
Improved traction to ensure positive two-wheel drive while minimizing tire scrubbing
Our all-battery model eliminates the need for a liquid fuel source altogether

Armrests	Optional
Battery	12V / 48V
Bedknife	Replaceable single edged, EdgeMax Microcut Bedknife is standard on all cutting units.
Bedknife Adjustment	Dual screw, indexed click adjustment to the reel; detents correspond to 0.0007" (0.018 mm) bedknife movement for each position.
Blade Style/Type	Reel
Blade Type (Description)	Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.
Charger	Off-board high efficiency 1200W smart charger. - AC input voltage 100-240VAC - AC input Frequency 50/60 Hz - Max input Current 14 A - Max charge time, empty to full: 9 hrs.
Clip Frequency/Backlapping	Standard, on-board and adjustable speed from 200520 RPM
Controls	Traction Pedal: Forward/Neutral/Reverse; Joystick: Raise/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors
Cup Holder	Standard
Cutting Unit Accessories	8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options.
Cutting Unit Lift/Lower	48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine velocity.
Cutting Unit Type/Configuration	Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Drivetrain	Electric
Electrical System	48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. Energy capacity: 10.77 kWh; 48V nominal.
Fuel / Power Source	Electric
Gauges/Instrumentation	InfoCenter: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics.
Grass Distribution	Non-adjustable shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.
Ground Clearance	3.8" (9.7 cm)
Ground Speed - Forward	0 - 10 mph (0 - 16 km/h)
Ground Speed - Reverse	0 - 5 mph (0 - 8 km/h)
Height	80.8" (205 cm)
Height of Cut Range	Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and bedknife installed.
Implement Drive	Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller.
Lighting	Optional
Main Frame/Chassis	Three tie-down locations (2 side, 1 rear).
Mowing Speed	0 - 5 mph (0 - 8 km/h)
Number of Blades	11, 14, 8
Optional Accessories	3WD Kit, Light Kit, Light Kit - Front Mount Brackets, Rear Light Kit, Seat Kit (Standard or Premium), Left Armrest Kit (Standard), Armrest Kit (Premium), Canopy, Utility Bag Kit, Wireless Hour Meter, Seat Cover
Overall Width	70.9" (180 cm)
Parking/Service Brakes	Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake.
Power Steering	Yes
Power Train (Engine Description)	Eight Lithium-Ion batteries.
Product Length	98" (249 cm) with baskets
RDS System	Radius Dependent Speeds Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending). Lift-In-Turn: Provides level cut from side to side of cutting units regardless of turning angle (patented).
Reel Diameter	5 in. (12.7cm)
Reel/Cylinder Drive	Electric
Rollers	Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft.
Safety/Operator Safety	Sound Power: 82 db(A) At Operator's Ear: 66 db(A)
Starting	Key Start
Steering System Description	48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
Tires - Front	19" x 10.5" - 8", 4-ply, Smooth Tread
Tires - Rear	19" x 10.5" - 8", 4-ply, Smooth Tread
Traction Drive	2WD
Traction Drive (System)	Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending).
Turning Circle (Diameter)	69.8" (182 cm) clearance to cutting unit motor
Weight	Mow: 1274 lbs (578 kg) Transport: 1,557 lbs (706 kg)
Wheelbase	49.8" (126.5 cm)
Width of Cut	59" (150 cm)

Quick Specs

Appearance
Type: Riding Mowers
Height: 80.8" (205 cm)

Product Warranty NL (3468-973)

Product Warranty SR (3473-397)

Product Warranty HU (3469-608)

Product Warranty RO (3473-398)

Product Warranty ENGLISH (3468-927)

Product Warranty FI (3470-523)

Product Warranty SL (3473-399)

Product Warranty FRENCH (3468-929)

Product Warranty SV (3470-524)

Product Warranty HR (3473-400)

Product Warranty DE (3468-971)

Product Warranty KOREAN (3470-965)

Product Warranty SPANISH (3468-928)

Product Warranty IS (3473-624)

Product Warranty IT (3468-972)

Product Warranty TH (3471-408)

Product Warranty DA (3473-645)

Product Warranty PL (3469-164)

Product Warranty CS (3473-719)

Product Warranty SK (3473-722)

Product Warranty ZH (3470-883)

Product Warranty JAPANESE (3471-563)

Product Warranty EL (3471-125)

Product Warranty PT (3471-668)

Product Warranty VI (3471-702)

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Lawn equipment can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new lawn equipment should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.