04580AA by Toro - Greensmaster eTriFlex 3360 with GeoLink Mow(04580AA)

Win the Battle to do More With Less

Accelerate your crews productivity and efficiency. One supervisor can operate multiple mowers while on the property, so you can free up labor to tackle other high-value tasks. Imagine what you can do with the flexibility to allocate your team where theyre needed most.

Keep the Art in Greenkeeping

Youre in control. Set custom striping patterns and more our GeoLink Mow technology will execute it flawlessly with Toros industry-leading reel cutting units for a superior quality of cut. Plus, the inside wheel and reels automatically slow down in turns to eliminate turf wear and scrubbing. When the machine stops, it will lift the reels and loop back to pick up where it left off on restart.

Deliver Precision on Repeat

When your mower drives straighter lines than any operator can, its easy to get consistently beautiful results. And managing the cleanup pass is a snap. Once youve set the map, the mower follows it with repeatable accuracy randomizing turnaround paths to minimize wear on the turf.

We Saved You a Seat

You have more options to maximize your investment. When this mower isnt in use on the fairway, it can be operated in standard mode to supplement your fleet. Plus, you can easily swap reels to mow tees or greens.

Minimize Interruptions With Smart Transport

Depending on your property, this machine can move from one fairway to the next based on your mapping input so you dont have to take time away from other tasks for transport. Our GeoLink technology follows your programmed map boundaries and obstacles, providing updates by text or through the mobile app.

Detect and Address Obstacles

Operate autonomously with confidence, knowing this mower is equipped with multiple state-of-the-art sensor technologies. If an obstacle is detected, it will stop, then resume normal operation when the obstacle is out of the way. If manual intervention is needed, it will alert you with a text message.

Monitor From Your Mobile Device

Supervise manual crews and perform other duties while monitoring the mowers operation from wherever you are on the property. If the mower needs attention, youll get a text message and can review diagnostics from your mobile device on the way to the machine.

Win the Battle to do More With Less Accelerate your crews productivity and efficiency. One supervisor can operate multiple mowers while on the property, so you can free up labor to tackle other high-value tasks. Imagine what you can do with the flexibility to allocate your team where theyre needed most.

Keep the Art in Greenkeeping Youre in control. Set custom striping patterns and more our GeoLink Mow technology will execute it flawlessly with Toros industry-leading reel cutting units for a superior quality of cut. Plus, the inside wheel and reels automatically slow down in turns to eliminate turf wear and scrubbing. When the machine stops, it will lift the reels and loop back to pick up where it left off on restart.

Deliver Precision on Repeat When your mower drives straighter lines than any operator can, its easy to get consistently beautiful results. And managing the cleanup pass is a snap. Once youve set the map, the mower follows it with repeatable accuracy randomizing turnaround paths to minimize wear on the turf.

We Saved You a Seat You have more options to maximize your investment. When this mower isnt in use on the fairway, it can be operated in standard mode to supplement your fleet. Plus, you can easily swap reels to mow tees or greens.

Minimize Interruptions With Smart Transport Depending on your property, this machine can move from one fairway to the next based on your mapping input so you dont have to take time away from other tasks for transport. Our GeoLink technology follows your programmed map boundaries and obstacles, providing updates by text or through the mobile app.

Detect and Address Obstacles Operate autonomously with confidence, knowing this mower is equipped with multiple state-of-the-art sensor technologies. If an obstacle is detected, it will stop, then resume normal operation when the obstacle is out of the way. If manual intervention is needed, it will alert you with a text message.

Monitor From Your Mobile Device Supervise manual crews and perform other duties while monitoring the mowers operation from wherever you are on the property. If the mower needs attention, youll get a text message and can review diagnostics from your mobile device on the way to the machine.

Features

Operate multiple mowers while on the property so your team can be where theyre needed most
Execute flawlessly with industry-leading reel cutting units for a superior quality of cut
Follows the set map with repeatable accuracy randomizing turnaround paths to minimize wear on turf
Operate in standard mode to supplement your fleet
Moves from one fairway to the next based on mapping input, depending on the property
Detects obstacles, stops, then resumes normal operation when the obstacle removed
Supervise manual crews and perform other duties while monitoring from your mobile device
Traction, lift, steering and reel drive are all electric, eliminating hydraulic fluid leaks

Battery	12V
Bedknife	Replaceable single edged, EdgeMax Microcut Bedknife is standard on all cutting units. Aggressiveness stays constant throughout the life of the reel regardless of reel or bedknife wear. Patented design.
Bedknife Adjustment	Dual screw, indexed click adjustment to the reel; detents correspond to 0.0007" (0.018 mm) bedknife movement for each position.
Blade Style/Type	Reel
Blade Type (Description)	Reels are 5" (13 cm) in diameter, 21" (53.3 cm) in length. EdgeSeries Reels blades are welded to 5 stamped steel spiders, and heat treated. The reel is ground for diameter and concentricity, and relief ground. The reel weldment shaft is a 1.375" (35 mm) diameter tube with internally splined threaded insert. Two stainless steel ball bearings (30 mm inside diameter) slip fit onto reel shaft retained by internally splined threaded insert. Low drag seals/slingers for added protection with o-ring sealed motor and counterweight. Reel position maintained by a wave washer with no adjusting nut.
Charger	Off-board high efficiency 1200W smart charger. AC input voltage 100-240VAC AC input Frequency 50/60 Hz Max input Current 14 A Max charge time, empty to full: 9 hrs.
Clip Frequency/Backlapping	Standard, on-board and adjustable speed from 200520 RPM
Controls	Traction Pedal: Forward/Neutral/Reverse; Joystick: Raise/Lower; Function control switch: Neutral, Mow, Transport; Key switch; Steering Arm Lock Pedal; Brake pedal; Parking Brake; InfoCenter; Seat Adjusting Lever; Main Power Connectors; Choke; Fuel-Shutoff Valve
Cup Holder	Standard
Cutting Unit Accessories	8, 11, 14-Blade Cutting Unit, Roller Options, Roller Scrapers / Brushes / Combs Options, Bedknife and Bedbar Options, Tools and Maintenance Options.
Cutting Unit Lift/Lower	48V electric linear actuators with fully integrated brushless permanent magnet motor and controller. Fully sealed with splash guard. Center lift actuator drop and raise delay is dependent on machine travel velocity.
Cutting Unit Type/Configuration	Triplex, balanced cutting units with precision die-cast aluminum cross member with two bolt-on die-cast aluminum side plates. Cutting units feature quick disconnect for removal/installation and are interchangeable to all positions. Double A-Arm Suspension utilizing sealed ball joints allows free cutting unit motion in pitch and yaw. Links system for the roll. The basket is directly mounted to the cutting unit displacing weight evenly over front and rear rollers. (patented)
Drivetrain	Hybrid
Electrical System	48V System for traction motor circuit, steering motor circuit, cutting unit motor circuit and lift / lower actuator circuit. 12V system for primary controls and brake actuator. 24V Safety System and autonomous control system.
Engine Cooling	Air Cooled
Fuel / Power Source	Hybrid
Fuel Capacity	4.9 U.S. gal. (18.5 L)
Gauges/Instrumentation	Diagnostics: Advanced machine diagnostics available through the InfoCenter. Additional autonomous and machine diagnostics available via the GeoLink Mow app. InfoCenter: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, low oil pressure, alternator, engine hours, engine rpm, voltage, functional control status, parking brake status, reel speed setting, backlap control, clip control, calibration of 48V components, advanced machine diagnostics.
Grass Distribution	Non-adjustable front shield with adjustable cut-off bar to improve grass discharge from reel in wet conditions.
Ground Clearance	3.8" (9.7cm)
Ground Speed - Forward	Autonomous Mowing: 0-5 mph (0-8 km/h) Autonomous Transport 0-3.4 mph (0-5.5 km/h); Reverse disabled when in autonomous mode. Mowing: 0-5 mph (0-8 km/h) Transport: 0-10 mph (0-16 km/h) Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
Ground Speed - Reverse	0 - 5 mph (0 - 8 km/h) Reverse disabled when in autonomous mode.
Height	83" (211cm)
Height of Cut Range	Cutting height is adjusted on front roller by two vertical screws and held by two locking cap screws. Bench HOC range is 0.062" - 0.297" (1.6 - 7.5 mm). With high HOC kit, range is 0.297" - 1.0" (7.5 - 25.4 mm). Effective HOC may vary depending on turf conditions and roller/bedknife installed.
Implement Drive	Three, 48V (1.1 KW), air-cooled brushless permanent magnet reel motors with separable controller.
Lighting	Optional
Main Frame/Chassis	Three tie-down locations (2 side, 1 rear).
Mowing Speed	0 - 5 mph (0 - 8 km/h)
Number of Blades	11, 14, 8
Optional Accessories	3WD Kit, Light Kit, Light Kit - Front Mount Brackets, Rear Light Kit, Seat Kit (Standard or Premium), Left Armrest Kit (Standard), Armrest Kit (Premium), Spark Arrestor Kit (Gas), Canopy, Utility Bag Kit, Wireless Hour Meter, Seat Cover
Overall Width	73" (185cm)
Parking/Service Brakes	Traction motor regenerative braking; foot pedal service/parking brake, linear-actuated automatic parking brake.
Power Steering	Yes
Power Train (Engine Description)	Engine: Kawasaki 14.5 HP (10.8 kW) @3600 rpm, gasoline, air-cooled, twin-cylinder, governed to 2400 rpm, displacement 36.8 cu-inch (603cc). Electrically-actuated choke. Generator: 48V 5400W air cooled brushless permanent magnet motor in parallel with four 12V 33AH AGM batteries (connected in series). Generator is used to start engine.
Product Length	98" (249 cm) with baskets
RDS System	Radius Dependent Speeds Clip Rate: Maintains consistent cutting unit clip rate in turns on each individual reel (patent-pending). Wheel Speed Control: Individual wheel speed control during turns (patent-pending).
Reel Diameter	5 in. (12.7cm)
Reel/Cylinder Drive	Electric
Rollers	Front: Not included with cutting unit, purchased separately. Option between full, narrow-spaced and wide-spaced Wiehle roller. Rear: Steel full, 2" (5.1 cm) diameter with sealed bearings and through-shaft.
Safety/Operator Safety	Sound Power: 91 db(A) Sound Power at Operator's Ear: 73 db(A) Sound Power to Bystander: 25 ft 78 db(A), 50 ft 73 db(A), 100 ft 66 db(A)
Steering System Description	48V electric steering motor with torque feedback device. Selective slow down feature for turning in mowing mode. Automatic slow down at high transport speeds when turning.
Tires - Front	19" x 10.5" - 8", 4-ply, Smooth Tread
Tires - Rear	19" x 10.5" - 8", 4-ply, Smooth Tread
Traction Drive	2WD
Traction Drive (System)	Positive 2WD traction drive: Two, brushless permanent magnet traction motors coupled to a gearbox. Optional 3WD. (patent-pending).
Turning Circle (Diameter)	Minimum Turning Radius to machine center line, manual mode: 35.9" (91cm). Turning radius for autonomous mode: 47.2" (120cm)
Weight	1,855 lbs (841 kg) (with 8-blade fairway cutting units)
Wheelbase	49.8" (126.5 cm)
Width of Cut	59" (150 cm)

Quick Specs

Appearance
Type: Riding Mowers
Height: 83" (211cm)

Product Warranty SPANISH (3468-928)

Product Warranty PL (3469-164)

Product Warranty ENGLISH (3468-927)

Product Warranty TH (3471-408)

Product Warranty EL (3471-125)

Product Warranty PT (3471-668)

Product Warranty VI (3471-702)

Product Warranty RO (3473-398)

Product Warranty SL (3473-399)

Product Warranty HR (3473-400)

Product Warranty IS (3473-624)

Product Warranty DA (3473-645)

Product Warranty CS (3473-719)

Product Warranty SK (3473-722)

Product Warranty FI (3470-523)

Product Warranty SV (3470-524)

Product Warranty SR (3473-397)

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Lawn equipment can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new lawn equipment should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.