03950 by Toro - Reelmaster 5010-H(03950) | Mathu's Appliance & Power Equipment

InfoCenter

Easily set and save maximum mow and transport speeds, view cruise control speed setting and monitor system information and service reminders and more with ease on the new console mounted InfoCenter.

Versatility

The Reelmaster 5010-H has a Plug and Play feature that allows it to accept 5-inch or 7-inch diameter DPA cutting units. Simply plug in the cutting unit and motors of your choice and the machine automatically makes all the necessary adjustments. The 5010-H can be equipped with 5" or 7" reels, in either 8 or 11 blade configurations.

Efficient Reel Control & Performance

Through the InfoCenter, electric reel motors allow for precise setting of the reel speed and clip rate providing consistent power across all five cutting units for a superior cut. The cutting units also feature low-drag seals and low-friction bearing which improve wear and reduce the required horsepower to run the decks.

48 Volt Battery Pack

The battery pack is made up of four, 12-volt, Absorbed Glass Mat (AGM) batteries that are maintenance-free and sealed. The batteries are very similar to the ones used in the automobile industry for start-stop hybrids. These batteries are designed for a very long life when they are shallowly discharged and repeatedly recharged with a system like our PowerMatch.

PowerMatch

With over 40 hp (29.8 kW) available , the PowerMatch system can handle verticutting, scalping, and steep hills. Power is used so efficiently that the Reelmaster 5010-H can perform at least on-par, and in many cases better than much higher horsepower machines. Nearly 10 years of vigorous real-world testing have proven the Reelmaster 5010-H has the power to perform in the most rigorous conditions, and the efficiency to keep it up year after year.

Worry Free

Removing the hydraulic cutting mowers and replacing them with electric motors on the Reelmaster 5010-H resulted in over 100 fewer leak points than a conventional 100" fairway mower. The remaining vehicle and cutting unit lift system hydraulic lines are predominately hard lines or hoses with limited movement, and are not subject to the same fatigue or service intervals as the cutting unit hoses and motors.

EdgeSeries Reels

Dual Precision Adjustment (DPA) cutting units featuring Toros EdgeSeries reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention. Watch the Video

Fuel Savings

Reelmaster 5010-H is the only fairway mower with a true hybrid powerplant. Like a hybrid vehicle, PowerMatch technology provides additional horsepower from the onboard battery pack only when it is needed, allowing the mower to perform on par with other similar mowers, while the smaller displacement engine provides unmatched fuel economy in this mower segment.

Electronic Cruise Control

Switch activated and push button adjustable electronic cruise control allows operators to easily maintain a constant mowing speed for consistent results. It can also be used to set up a "slow in turn" to minimize the risk of turf damage.

InfoCenter Easily set and save maximum mow and transport speeds, view cruise control speed setting and monitor system information and service reminders and more with ease on the new console mounted InfoCenter.

Versatility The Reelmaster 5010-H has a Plug and Play feature that allows it to accept 5-inch or 7-inch diameter DPA cutting units. Simply plug in the cutting unit and motors of your choice and the machine automatically makes all the necessary adjustments. The 5010-H can be equipped with 5" or 7" reels, in either 8 or 11 blade configurations.

Efficient Reel Control & Performance Through the InfoCenter, electric reel motors allow for precise setting of the reel speed and clip rate providing consistent power across all five cutting units for a superior cut. The cutting units also feature low-drag seals and low-friction bearing which improve wear and reduce the required horsepower to run the decks.

48 Volt Battery Pack The battery pack is made up of four, 12-volt, Absorbed Glass Mat (AGM) batteries that are maintenance-free and sealed. The batteries are very similar to the ones used in the automobile industry for start-stop hybrids. These batteries are designed for a very long life when they are shallowly discharged and repeatedly recharged with a system like our PowerMatch.

PowerMatch With over 40 hp (29.8 kW) available , the PowerMatch system can handle verticutting, scalping, and steep hills. Power is used so efficiently that the Reelmaster 5010-H can perform at least on-par, and in many cases better than much higher horsepower machines. Nearly 10 years of vigorous real-world testing have proven the Reelmaster 5010-H has the power to perform in the most rigorous conditions, and the efficiency to keep it up year after year.

Worry Free Removing the hydraulic cutting mowers and replacing them with electric motors on the Reelmaster 5010-H resulted in over 100 fewer leak points than a conventional 100" fairway mower. The remaining vehicle and cutting unit lift system hydraulic lines are predominately hard lines or hoses with limited movement, and are not subject to the same fatigue or service intervals as the cutting unit hoses and motors.

EdgeSeries Reels Dual Precision Adjustment (DPA) cutting units featuring Toros EdgeSeries reels combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention. Watch the Video

Fuel Savings Reelmaster 5010-H is the only fairway mower with a true hybrid powerplant. Like a hybrid vehicle, PowerMatch technology provides additional horsepower from the onboard battery pack only when it is needed, allowing the mower to perform on par with other similar mowers, while the smaller displacement engine provides unmatched fuel economy in this mower segment.

Electronic Cruise Control Switch activated and push button adjustable electronic cruise control allows operators to easily maintain a constant mowing speed for consistent results. It can also be used to set up a "slow in turn" to minimize the risk of turf damage.

Features

The onboard LCD display provides system information, alerts, service reminders, diagnostics, and more.
Plug and Play feature allows it to accept 5-inch or 7-inch diameter DPA cutting units.
After desired clip rate is set, reel speed automatically and continuously adjusts to ground speed, ensuring consistent cutting performance across all 5 cutting units.
Includes four, 12-volt, Absorbed Glass Mat (AGM) sealed, maintenance-free batteries.
With over 40 hp available, the machine power output is matched to what the condidtions require including verticutting, scalping and steep hills.
Switching to electric motors resulted in over 100 fewer leak points than a conventional 100" fairway mower.
Dual Precision Adjustment (DPA) cutting units combine to deliver a consistent, high quality cut and superior after cut appearance, while reducing maintenance with improved reel edge retention.
Save an average of 20% in fuel consumption over comparably equipped mowers.
Easily keep a consistent speed and reduce fatigue while mowing large areas.
Durability, performance, comfort, and serviceability come standard.

Armrests	Standard
Battery	12V AGM
Bedknife Adjustment	Precision machined cutting units maintain levelness and hold adjustments. Dual Precision Adjustment (DPA) allows quick bedknife to reel adjustment.
Blade Style/Type	Reel
Blade Type (Description)	EdgeSeries DPA radial or forward swept reels
Clip Frequency/Backlapping	Electronically controlled, variable reel speed for optimal clip frequency and independently controlled backlap speed. Standard on-board backlapping.
Controls	Single foot-operated traction pedal, foot actuated mow speed limiter, foot actuated service and parking brake. Hand-operated key ignition switch, switch-operated throttle, isochronous engine speed control, cutting unit raise/lower joystick, cutting unit engage switch, and LED headlight switch, all positioned on right hand pivoting control console.
Cooling System Description	Rear mounted radiator with industrial tube and fin construction, 6 fins per inch, 5.5 quart (5.2 liter) system capacity.
Cup Holder	Standard
Cutting Unit Accessories	Rear Roller Brush Kit, Universal Groomer, Broomer, Grass Baskets
Cutting Unit Lift/Lower	Hydraulic - front and rear cutting unit lift/lower are sequenced for uniform starting and ending points.
Cutting Unit Type/Configuration	Five electrically driven, DPA cutting units with low-drag seal and bearing package. Frame precision manufactured, die-cast aluminum for increased strength, simple click adjustment maintenance.
Drivetrain	Hybrid
Electrical System	Heavy duty 12-volt battery, 570 CCA, 40 amp alternator. Electronic control unit is a microprocessor based, solid state control unit with diagnostic capabilities.
Engine Cooling	Liquid Cooled
Fuel / Power Source	Hybrid
Fuel Capacity	14 U.S. gal. (53 L)
Fuel Filter	Replaceable spin-on fuel filter/water separator.
Gauges/Instrumentation	InfoCenter: Onboard LCD display shows gauges, alerts/faults, service reminders, electrical system diagnostics, indicates fuel level, coolant temp., low oil pressure, alternator, engine hours, engine rpm, voltage, reel speed, backlap speed, glow indicator, lift/lower indicator.
Ground Speed - Forward	0 - 10 mph (0 - 16.1 km/h)
Ground Speed - Reverse	0 - 4 mph (0 - 6.4 km/h)
Height	63" (160 cm) to seat, 85.5" (217.2 cm) to ROPS
Height of Cut Range	8-Blade: 5": 0.5" - 1.5" (13 mm -38 mm) 7": 0.5" - 2.0" (13 mm - 51 mm) 11-Blade: 0.25" - 0.75" (6 mm -19 mm)
Hydraulic Fluid Type	Toro PX Extended Life Hydraulic Fluid
IntelliDash Capable	Yes
Interlocks	Traction pedal, parking brake, operator presence in seat, and cutting unit engage/disengage safety interlock switches.
Lighting	Standard
Main Frame/Chassis	High strength steel frame with welded construction.
Max Slope Angle	Refer to operator's manual.
Mowing Speed	0 - 8 mph (0 - 12.8 km/h)
Number of Blades	11, 8
Oil Capacity	3.5 U.S. qt. (3.3 L)
Oil Cooler Description	Pressurized lubrication system.
Optional Accessories	Sunshade (with optional operator cooling fan, LED work lights, rotating amber beacon), 2-post ROPS Extension Kit (with optional windshield, operator cooling fan, LED work lights, rotating amber beacon and safety and security cage)
Overall Width	116" (288.3 cm)
Parking/Service Brakes	Individual left and right drum-type front wheel brakes. Brakes may be actuated for service braking via left foot pedal. Integrated foot pedal lock provides parking brake. Dynamic braking through hydrostatic traction drive system.
Power Steering	Yes
Power Train (Engine Description)	Kubota liquid-cooled diesel, 3-cylinder, 24.8 hp (18.5 kW). Four 12V Absorbed Glass Mat (AGM), sealed, maintenance-free lead carbon batteries. Tier IV compliant.
Product Length	111" (281.9 cm)
Reel Diameter	5 in. or 7 in. (12.7cm or 17.8cm)
Reel/Cylinder Drive	Electric
Rollers	Wiehle front roller and standard rear roller included. Optional front full and shoulder rollers, and longer rear rollers available.
Safety/Operator Safety	2-post ROPS and retractable seat belts standard
Seat	Deluxe high back suspension seat with fore, aft, height and weight adjustment.
Starting	Switch
Steering System Description	Rear wheel, power steering with an independent hydraulic pump and circuit.
Tires - Front	26.5" x 14" - 12", 4-ply, Turf Tire
Tires - Rear	20" x 12" - 10", 4-ply, Turf Tread
Tool Box	Standard
Traction Drive	Front-Wheel Drive
Traction Drive (System)	Front drive wheels powered by a hydrostatic pump with individual wheel motors. All-wheel drive optional with CrossTrax All-Wheel Drive system, which transfers power from the front wheels to the opposite rear wheels via independent rear wheel motors.
Transport Width	92" (233.7 cm)
Weight	With 5" cutting units: 2WD 2,776 lbs. (1,259 kg), 4WD 2,827 lbs. (1,282 kg) With 7" cutting units: 2WD 2,907 lbs. (1,319 kg), 4WD 2,965 lbs. (1,345 kg)
Wheelbase	60" (152.4 cm)
Width of Cut	100" (254 cm)

Quick Specs

Appearance
Type: Riding Mowers
Height: 63" (160 cm) to seat, 85.5" (217.2 cm) to rops

Product Warranty IT (3468-972)

Product Warranty EL (3471-125)

Product Warranty PL (3469-164)

Product Warranty PT (3471-668)

Product Warranty NL (3468-973)

Product Warranty VI (3471-702)

Product Warranty IS (3473-624)

Product Warranty HU (3469-608)

Product Warranty DA (3473-645)

Product Warranty FI (3470-523)

Product Warranty KOREAN (3470-965)

Product Warranty SR (3473-397)

Product Warranty CS (3473-719)

Product Warranty SK (3473-722)

Product Warranty SV (3470-524)

Product Warranty ENGLISH (3468-927)

Product Warranty RO (3473-398)

Product Warranty FRENCH (3468-929)

Product Warranty TH (3471-408)

Product Warranty SL (3473-399)

Product Warranty DE (3468-971)

Product Warranty ZH (3470-883)

Product Warranty HR (3473-400)

Product Warranty SPANISH (3468-928)

Product Warranty JAPANESE (3471-563)

Get Adobe Reader

* Documents require Adobe Reader.

Professional delivery and installation is available for every product we sell. We would be happy to coordinate delivery and installation for you.

Extended warranties are usually very inexpensive and can save you thousands in the future. It's simple and inexpensive to purchase extended warranties and one of the smartest ways to protect your investment.

Lawn equipment can be large, heavy and expensive. You probably don't have the special tools or expertise needed to fix them in a crisis. If you can spare a few thousand dollars without batting an eyelash for new lawn equipment should they break tomorrow, don't buy a warranty. But if you're like most of us, protect yourself by purchasing inexpensive extended warranties when you buy a new product and save yourself big money in the long run.